Select Page

HT40 Crane Service Body

HT40 Crane Service Body are engineered heavy-duty and manufactured exclusively for service cranes. Industrial Manlifts (888)730-8377

HT40 Crane Service Body

 

HT40 Crane Service Body Features:

 

HT40 Crane Service Body are engineered heavy-duty and manufactured exclusively for service cranes. The HT40 Crane Service Body supports the  service cranes up to 40,000 FT-LBS on a 14,500 GVWR chassis and includes three different models to choose from.

 

Model Number CA Chassis Min GVWR FT/LB Rating Length Compartment Height
HT40-131-FLT 84" 14,500 40,000 11' 44"
HT40-131-TFC 84" 14,500 40,000 11' 44"
HT40-131-DTF 84" 14,500 40,000 11' 44"

FEATURES & BENEFITS

  • Jet Kote ASTM A-60 steel construction
  • LED Stop/Turn/Tail/Backup, Marker and ID Lighting included with Wire Harness and Junction Box.  All bodies are designed with pre-punched light mounting holes for ease of installation
  • Optional workbench bumper with pass-through storage area and hinged doors with vice-plate
  • Fold-down, rear tailgate sized to the full width of the bed opening with right-hand and left-hand zinc plated tailgate latches and hinges
  • Three-point keyed-alike premium ergonomic Eberhard compression door handles for increased ease of use
  • Unobstructed reinforced compartment for 25,000, 40,000, 50,000 and 66,000 FT-LB cranes
  • Dual weather stripping in protective door channels for added water protection
  • Gutter-style drip rail above compartment doors for added water protection
  • Pre-installed front and rear outrigger cross-tubes with FULL STABILITY in all rotation zones
  • Substructure consists of a one-piece continuous longitudinal frame with integrated crane tower reinforcement up to 66,000 FT-LBS
  • Adjustable uni-strut shelf standards which allow greater flexibility for compartment loading
  • D-ring cargo tie downs installed in the cargo floor with a 5,000 lb maximum capacity (6-8 depending on body length)
  • 10-guage, diamond-plate steel cargo floor, sides and compartment tops provide extreme durability and secure auxiliary equipment mounting
  • Bulkhead and wheel well panels constructed of 12-guage Jet Kote ASTM A-60 steel sheet
  • All stainless steel continuous hinges for unmatched security
  • Stainless-steel spring-loaded door keepers hold doors open at 90 degrees and are self-closing
  • Double-panel lap-style 14-guage Jet Kote ASTM A-60 steel doors
  • Pre-punched bottle vents

 

Industrial Man Lifts is your aerial access solution provider. We can customize any product for any size job. Operators always standing by, (888) 730-8377.

Reviews

There are no reviews yet.

Be the first to review “HT40 Crane Service Body”

Your email address will not be published.

Share This

Share this post with your friends!

Skip to content