Select Page

1532ES Electric Scissor Lift

Industrial Grade 1532ES Electric Scissor Lifts

  • Fully proportional drive and lift controls
  • No-maintenance scissor bearings
  • Roll-out deck extension with incremental locking positions
  • Non-skid, steel deck construction
  • Large sheet loading entrance
  • Single arm scissor provides easy access for maintenance. No need for swing-out stations or tight working conditions.
  • Patented Powerlift2  elevating system - built strong and works tough
  • High torque power package
  • Compact design fits in small and tight work areas
1532ES Electric Scissor Lifts Features: Work Area
  • Roll-out deck extension with incremental locking positions
  • Large sheet loading entrance accommodates 48(1.22 m) material
  • 110V Power to Platform
  • Combination of wide beams and large pins in self-lubricating bearings for larger load bearing surface in scissor pivot areas
Performance
  • Fully Proportional Drive and Lift Controls
  • High Torque Power Package
Engine/Power
  • Four 6V 220Ah Industrial Deep Cycle Batteries
Serviceability
  • Lubrication-Free Scissor Bearings
  • Specially designed hydraulic swivel fittings to reduce hydraulic hose binding and hose failure
  • Easy maintenance access to mechanical and electrical components without raising platform or swinging out trays
  • Logically grouped components and numbered wiring for easy reference
Safety
  • Dedicated compartments protect electrical and hydraulic components
  • Emergency shut-off at platform and lower controls
  • Non-Skid Steel Deck Construction
  • Motion Alarm
  • Drive Speed Interlock
  • Multi-Axis Tilt Sensor
  • Multiple Disc Brakes, manual brake release
  • Scissor Maintenance Lock
  • Dual Automatic Parking Brake
  • Automatic Pothole Protection

1532ES Electric Scissor Lift Specifications:

 DIMENSIONS
 Length  74 in. (1.88 m)
 Height  Working: 21 ft. (6.57 m) Platform: 15 ft. (4.57 m) Maximum Drive: 15 ft. (4.57 m) Stowed (Top Guardrail): 75 in. (1.9 m) Stowed (Platform Floor): 34.5 in. (0.87 m)
 Width  31.5 in. (0.8 m)
 Weight  2,725 lbs. (1,236 kg)
 Ground Clearance  3 in. (7.6 cm) 0.75 in. (1.9 cm) pothole guards deployed
 Wheelbase  50 in. (1.27 m)
 Turning Radius  Inside: 2 in. (5 cm) Outside: 67 in. (1.7 m)
 ENGINE & DRIVETRAIN
 Horsepower  4 hp (2.98 kW) @ 3,000 rpm electric motor
 Drive System  Proportional Drive Axle: Dual front wheel hydraulic
 BATTERY
 Battery  (4) 6V deep cycle, 220Ah @ 20 hr. rating
 HYDRAULICS
 Hydraulic Tank Capacity  3 gal. (11.36 l)
 Operating Pressure  Main System: 2,750 psi (190 bar) Lift System: 1,900 psi (131 bar) Steer: 850 psi (62 bar)
 PERFORMANCE
 Tires  Solid non-marking rubber 14 x 4.5 in. (35.56 x 1.43 cm)
 Travel Speed  Raised: 0.5 mph (0.8 km/h) Stowed: 2.5 mph (4 km/h)
 Gradeability  35%
 Capacity  2 occupants Lift: 600 lbs. (272 kg) evenly distributed Roll-Out Deck: 250 lbs. (113 kg)
 Platform Height  Guard Rail: 40.5 in. (1.03 m) Toe Board: 7.625 in. (19 cm)
 Platform Size  Extended Length: 102 in. (2.59 m) Retracted Length: 66 in. (1.68 m) Roll-Out Deck Length: 36 in. (0.91 m)
 Raise/Lower Time  12/20 sec.
  Industrial Manlifts is YOUR total aerial access solution provider. We can customize any aerial access solution for any project. Operators standing by, (888) 730-8377.

Reviews

There are no reviews yet.

Be the first to review “1532ES Electric Scissor Lift”

Your email address will not be published. Required fields are marked *

Share This

Share this post with your friends!