Description

Industrial Grade 3247ES Electric Scissor Lifts

•  Fully proportional drive and lift controls
•  No-maintenance scissor bearings
•  Roll-out deck extension with incremental locking positions
•  Non-skid, steel deck construction
•  Large sheet loading entrance
•  Single arm scissor provides easy access for maintenance. No need for swing-out stations or tight working conditions.
•  Patented Powerlift2 elevating system – built strong and works tough
•  High torque power package
•  Higher capacity (up to 1,250 lbs/566 kg) expands applications and productivity

3247ES Electric Scissor Lifts Features:

Work Area

• Roll-out deck extension with incremental locking positions
• Large sheet loading entrance accommodates 48 (1.22 m) material
• 110V Power to Platform
• Combination of wide beams and large pins in self-lubricating bearings for larger load bearing surface in scissor pivot areas
• Extra wide platform for spacious work area

Performance

• Fully Proportional Drive and Lift Controls
• High Torque Power Package
• Engine/Power
• Four 6V 220Ah Industrial Deep Cycle Batteries (245Ah on 3247ES)

Serviceability

• Lubrication-Free Scissor Bearings
• Specially designed hydraulic swivel fittings to reduce hydraulic hose binding and hose failure
• Easy maintenance access to mechanical and electrical components without raising platform or swinging out trays
• Logically grouped components and numbered wiring for easy reference

Safety

• Dedicated compartments protect electrical and hydraulic components
• Emergency shut-off at platform and lower controls
• Non-Skid Steel Deck Construction
• Motion Alarm
• Drive Speed Interlock
• Multi-Axis Tilt Sensor
• Multiple Disc Brakes, manual brake release
• Scissor Maintenance Lock
• Dual Automatic Parking Brake
• Automatic Pothole Protection

3247ES Electric Scissor Lift Specifications:

DIMENSIONS  Length  99 in. (2.51 m)  Height  Working: 38 ft. (11.75 m) Platform: 32 ft. (9.75 m) Stowed (Top Guardrail): 95.25 in. (2.45 m) Stowed (Rails Folded): 76 in. (1.94 m)  Width  47 in. (1.19 m)  Weight  5,990 lbs. (2,717 kg)  Ground Clearance  3.5 in. (8.89 cm) 0.75 in. (1.9 cm)  Wheelbase  71 in. (1.8 m)  Turning Radius  Inside: Zero Outside: 94 in. (2.4 m)  ENGINE & DRIVETRAIN  Horsepower  4 hp (2.98 kW) @ 3,000 rpm  Drive System  Proportional drive and lift controls Axle: Dual front wheel hydraulic  ELECTRICAL  Motor  Electric  BATTERY  Battery  (4) 6V deep cycle, 220Ah @ 20 hr. rating  HYDRAULICS  Hydraulic Tank Capacity  4.5 gal. (17 l)  Operating Pressure  Main: 2,750 psi (190 bar) Lift: 2,500 psi (172.4 bar) Steer: 900 psi (62 bar)  PERFORMANCE  Tires  Solid, non-marking rubber 16 x 5 in. (40.64 x 12.7 cm)  Tracks  Wheel: 41 in. (1.04 m)  Travel Speed  Raised: 0.62 mph (1 km/h) Stowed: 2.5 mph (4 km/h)  Gradeability  25%  Capacity  2 occupants Lift: 700 lbs. (318 kg) evenly distributed Roll-Out Deck: 250 lbs. (113 kg)  Platform Height  Guardrail: 43.4 in. (1.1 m) Toeboard: 6 in. (15 cm)  Platform Size  Extended Length: 133.5 in. (33.9 m) Retracted Length: 91 in. (2.31 m) Roll-Out Deck: 42.1 in. (1.07 m)  Raise/Lower Time  42/32 sec.

 

Industrial Manlifts is YOUR total aerial access solution provider. We can customize any aerial access solution for any project. Operators standing by, (727) 490-8839.