Select Page

Series 35 Electrical Powered Turntable

Series 35 Electrical Powered Turntable

   

Durability and Quality

  • Chrome plated center kingpin prevents corrosion of the pin and reduces wear on the sprocket center bearing.
  • High impact, spiral wound bearing at the main pivot point provides maintenance-free, rugged resistance to abrasion, impact, and uneven loads.
  • 1/2-inch-thick steel platform minimizes deck deflection and maximizes load stability.
  • High capacity needle bearing rollers reduce turning friction and minimize motor torque requirements, extending motor life.
  • Adjustable torque limiter prevents damage to the motor and gearbox by "slipping" whenever over-load or jammed-load conditions occur.

Maintenance and Warranty

  • IML offers an industry-best 2 year warranty on all parts as a promise that you've purchased the industry's most reliable turntable.
  • Maintenance-free bearings at pivot points require no lubrication.

Simplicity

  • Standard controls are prewired and drive unit is already onboard. Installation only requires the turntable to be lagged to the ground and connected to electricity.
  • Chain tension is easily adjustable to minimize wear and reduce noise.
  • Lag-down holes are provided in the base to allow easier relocation.
  • Both single-direction and bi-directional controls are available.
  • Drive motors are rated for variable frequency drive control signals

Safety

  • Turntable retention system prevents the platform from tipping during any type of edge or off-center loading.
  • Removable chain guards protect personnel from inadvertent contact with the powered chain.
  • Minimum 3:1 structural factor of safety makes these lifts the most structurally sound lift in the industry.
  • Compliance with recognized standards:
    • NFPA 70 - National Electric Code
    • ASTM - A36 - Structural Steel Standard
    • ANSI Z535 - Safety Labeling Requirements
    • AWS D.1 - Welding Standards
    • Applicable portions of OSHA 29CFR1910 - General workplace safety
  Series 35 Electrical Powered Turntable Features:    
Model Capacity (lbs#) Lowered Height (inches) Base Frame Width Base Frame Length Maximum Platform Width Maximum Platform Length Shipping Weight Approx# (lbs#)
SRP-3625 2500 10 24 24 36 36 385
SRP-4225 2500 10 24 24 42 42 450
SRP-4248-25 2500 10 24 24 42 48 485
SRP-4825 2500 10 24 24 48 48 525
SRP-3640 4000 10 24 24 36 36 385
SRP-4240 4000 10 24 24 42 42 450
SRP-4248-40 4000 10 24 24 42 48 485
SRP-4840 4000 10 24 24 48 48 525
SRP-3660 6000 10 24 24 36 36 385
SRP-4260 6000 10 24 24 42 42 450
SRP-4248-60 6000 10 24 24 42 48 485
SRP-4860 6000 10 24 24 48 48 525
  Industrial Man Lifts is your aerial access solution provider. We can customize any product for any size job. Operators always standing by, (888) 730-8377.

Reviews

There are no reviews yet.

Be the first to review “Series 35 Electrical Powered Turntable”

Your email address will not be published. Required fields are marked *

Share This

Share this post with your friends!